Sub-station

 16 years manufacturer for metal truss, mobile stage, aluminium scaffolding, barriers, etc,.

Aluminum alloy stage truss takes you to understand

by:Shizhan     2020-05-30
1. First, you need to place four bases on the approximate position on the ground, and then connect the lower legs to make these brackets on the same level; 2. Feed the outer part of the base above the four corners diagonally and support the part under the bracket, and then insert 2 above each corner, a total of 8 are needed; 3. Fix the reverse head on the base with screws, pay attention to the direction of rotation of the reverse head as shown in the figure; 4. Put a square set on the reverse head; 5. Connect the beam on the ground; 6. Butt the two ends of the beam and the square sleeves on both sides, and here the parts of the beam are assembled on the ground; Aluminum alloy truss 7. Connect the vertical column truss lying down, the role of the hoist is to lift the lower beam truss; 8. This requires several people to slowly erect the truss of the post, remember not to push the post with too much force, and then fix the screws on the reverse head; 9. After the upright is erected, hook the hook below the hoist to the lower beam through the sling; 10.4 Slowly pull the hanging hoist together by the individual to the left and right of the person's head; 11. Install lighting and sound equipment on the beam; 12.4 People pull the hanging height of Huludao together to stop; 13. Tighten one end of the diagonal support and the column, and then also fix the other end and the horizontal support of the base, so the aluminum alloy frame is completed.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...