Sub-station

 16 years manufacturer for metal truss, mobile stage, aluminium scaffolding, barriers, etc,.

Button scaffold, check and acceptance of the main points - Jiangxi hot galvanizing plate buckles custom - Industry dynamic - - aluminum alloy scaffolding manufacturer Focus on the work high above the

by:Shizhan     2020-08-30
Jiangxi hot galvanizing plate buckles custom contact phone number: 18420150310 button scaffolding is currently the most advanced scaffolding products, the market time the shortest, most convenient and trust of scaffolding products, reliable quality, construction progress is fast, efficient province labor for more money; But every after completion of the erection of scaffolding products for inspection and acceptance; So in construction specification, about disk button scaffolding, construction, check and acceptance of what are the requirements? Inspection and acceptance point 1. To enter the site button scaffold components of the inspection and acceptance shall meet the following requirements: 1) Should have button scaffolding product identification and product quality certification (2) Should have a button scaffold products, the main technical parameters and specification 3) When in doubt the quality of button scaffolding, and test of sampling observation of quality should be 2. Template scaffold should be according to the following conditions according to the progress in stages for inspection and acceptance 1) After the completion of the foundation and template support build-up before 2) More than 8 m high formwork erection to half height after 3) After the erection height to meet the design height and 3 before concrete pouring. Scaffold project should be according to the following conditions according to the progress in stages for inspection and acceptance 1) After the completion of the foundation, before button scaffolding, 2) The first paragraph height reaches 6 m 3) The frame body increased along with the construction progress step by step 4) 4 after the erection height to meet the design height. Button in the template support scaffold construction, should focus on inspection and acceptance of the following contents: 1) Scaffolding foundation should comply with the design requirements and should level off, solid state between rod and foundation shall be no loosening, dangling, base, bedding should comply with the provisions of 2) The erection of the frame body three-dimensional size should comply with the design requirements, the erection method and diagonal, such as steel pipe bracing set shall comply with the requirements of the relevant construction specifications. 3) Adjustable bracket and adjustable tap out level of qualified cantilever length should comply with the design requirements. 4) Horizontal bar buckle joint with vertical rod connecting bolt should be close to the sign of insertion depth required scale. 5. Button scaffolding used in the scaffold project, should focus on inspection and acceptance of the following contents: 1) Erection of disk button scaffolding body three-dimensional size should comply with the design requirements, diagonal and steel pipe bracing set shall comply with the requirements of the relevant construction specifications. 2) Button scaffold stud should be no uneven settlement of the foundation, contact poling adjustable base and foundation surface should not have loosening and dangling 3) Even the wall a set should comply with the design requirements, should be connected with the main structure and reliable in the frame body 4) Lateral safety set net, the hanging and protective railings of the medial interlayer level network Settings should be complete, the firm 5) Turnover use of stent components should be tested for appearance inspection before use, and records should be 6) Disk button scaffolding, construction records and quality inspection records shall be timely, complete 6. Template bracket and double exclusive scaffold formed after acceptance records, records should be consistent with the the socket type plate fastener type steel tube scaffold safety technical regulations is set above a scaffold in the points of attention in the process of examination and acceptance. At the same time on May 1, 2017 construction industry standards of the People's Republic of China on the implementation of the socket type plate fastener type steel tube scaffold components, the button that is very detailed, is also the current button scaffolding enterprises implement the relevant standards of jiangxi hot galvanizing plate buckles custom
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...