16 years manufacturer for metal truss, mobile stage, aluminium scaffolding, barriers, etc,.

Common aluminum alloy stage construction process

by:Shizhan     2020-05-16
Various stage systems of different sizes and models can be built according to the site. The compressive strength and anti-corrosion of aluminum profiles can be extremely strong. They can be divided into plug and screw types according to the type of construction. Introduce the technical issues of the stage truss construction. Construction of stage truss, aluminum alloy lamp holder process: Materials required to build a 12 * 6 * 6m daylighting frame: 3m aluminum alloy truss 12 * 2m aluminum alloy truss 8 * 1m aluminum alloy truss, 8 diagonal supports, 4 iron bases, 4 inverted heads, 4 square sets, 4 crossarms, 4 slings, 4 winches, screws, etc. Aluminum alloy light frame construction method: Set up four bases on the ground; Insert the lower part of the diagonal support on the outside of each base; Fix the reverse head on the base with screws; Connect the beams; Two sets of square butt chains at both ends of the beam and on both sides, at this time the beam part is assembled on the ground; Connect the column truss flat, and then fix one end to the cross bar and the other end to the cross bar, and connect the crane and the cross bar well. The role of the hoist is to hoist the lower beam truss. Be careful not to push the post too hard, and then screw the screw on the back; after erecting the post, the hook under the hanging hoist is hooked on the lower beam through the hanging strap; 4 people slowly dragged the hoist and pulled the beam to the left and right head position; Install lighting and sound equipment on the beam; 4 people drag the gourd to a predetermined height and stop; Tighten one end of the brace and column, and tighten the other end of the base and the cross support to complete the gantry. Material description: The diagonal support diagonal bar is made of aluminum alloy, the base is made of iron and aluminum, the cross arm is made of steel, and the truss, square cover, square head and inverted head are made of aluminum alloy. Aluminum alloy stage The performance stage herringbone ladder is used as the left and right performance stage. There are two kinds of materials: aluminum alloy profiles and steel materials. The number of stacked steps can be customized. , Can be equipped with components according to the model, the above is our common aluminum alloy stage construction process
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...