Construction scaffolding dismantling of the technique and matters needing attention
Jiangsu Shizhan scaffolding engineering co. , LTD
Scaffolding demolition of the building has a very strict rules, if removed is likely to endanger the safety of life at random, let below small make up together to see construction scaffolding demolition technique and matters needing attention.
1, dismantle scaffold sequence should be from the top down, step by step a forbidden and homework at the same time.
2, remove the frame pole, fittings and other materials, should use humping, dumping shall be strictly prohibited.
Has been discharged (
Open hand foot pole, bamboo fence, should one-time all finished.
3, all the wall should be with scaffolding removed one by one, it is strictly prohibited to even a whole wall layer or layers of demolition and then dismantle scaffold;
Segmented demolition of elevation difference should not be more than two steps, such as the elevation difference is greater than two steps should add the wall reinforcement.
4, when the scaffold to the height of the bottom after a long pole, according to the need to take a temporary support reinforcement in proper place, open even after the wall.
5, when the scaffold to block discrete surface removal, for not dismantle scaffold should be set on both ends of the wall and lateral support reinforcement.
6, all components need to penetration and the ground in time, it is forbidden to throw;
A scaffold is dismantled, the need to work out a clear, materials piled up neatly, security and stability, and transshipment in time.
7, to the components of the ground should be checked according to the requirements of the timely repair and maintenance, and stacking storage at any time according to the varieties, specifications, placed in a dry ventilated place, prevent rust.
Scaffolding demolition method and the matters needing attention, construction should be confirmed by the unit, head of the engineering inspection validation is no longer in need of scaffold, shall be removed.
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: firstname.lastname@example.org Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China