Scaffolding demolition shall be convened by the project leader before relevant personnel to the project to conduct a comprehensive inspection, verification and safety technical disclosure, confirm the building has been completed, did not need scaffolding, before being removed.
Before dismantling scaffolding, stands on the remaining materials, such as clearing debris clean.
Scaffolding demolition of general order: safety federated eye network & rarr;
Out feet & rarr;
Foot hand piece & rarr;
Even the wall bar & rarr;
Rod & rarr;
Bracing & rarr;
Joist & rarr;
The ledger & rarr;
Small bar & rarr;
Stud & rarr;
Board according to the top-down, first build after the demolition, then take the first step by step down the demolition, it is strictly prohibited and homework at the same time, shall not adopt any step type or take section, division surface dismantled.
All wall rod should with scaffolding removed one by one, it is strictly prohibited to remove the wall rod with the whole layer or layers after the demolition of frame body;
Dismantle the wall bar at the same time should be set up temporary wall bar reinforcement.
All components should be layered and segmented from demolished passed down, it is forbidden to throw at random.
Remove the steel pipes, fasteners and other materials to the ground, shall, from time to time, according to the varieties, specifications and neatly stacked, safekeeping.
1, shelf dismantled should cross section, a rope tied around the fence or warning signs, the ground should be designated persons command, prohibit the operation personnel to enter.
2, the heights of the open shelf homework personnel should wear safety helmet, fasten your seat belt, foot-binding, feet, wear soft bottom shoes grave allow check homework.
3 order shall comply with the top-down, demolition, to build after the demolition, after put down first, the principle of first break edge bracing, brace, then small bar, bar, post, etc. , and based on the principles of a clear step, in turn, to demolition of up and down at the same time shall be strictly forbidden.
4, tear open poling embrace stud apart again after two clasp, demolition of big modulus rod, brace, bracing, should first open the middle button, and then hold the middle, and end button.
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: firstname.lastname@example.org Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China