Sub-station

 16 years manufacturer for metal truss, mobile stage, aluminium scaffolding, barriers, etc,.

- electrical installation, falling accident Industry dynamic - - aluminum alloy scaffolding manufacturer Focus - aerial work platform Jiangsu shizhan security

by:Shizhan     2020-09-06
Operation stage: electrical installation accident types: fall mainly the cause of the accident: violation of operating procedures and labor discipline casualties: injuries, 1 a, accident situation * month *, 2007, at the scene of the gantry crane installation, electrical director Yang is a so-and-so person such as cable arrangement backman summer wear pipe work, work will be finished, Yang is a leave the job site to the agency to check. At that time, the other workers did not notice the summer so-and-so has aloft work. Suddenly hear a sound, found that summer so-and-so has to fall on the ground, then immediately make a phone call to the construction site, to send a cab to summer so-and-so rushed to a local hospital. Diagnosed as the fracture of the skull base, after summer so-and-so injury under control, but still in intensive care units heal, 45 days after the summer so-and-so due to complications after rescue invalid death. Direct cause, the cause of the accident analysis of 1, 2 summer fall in XXX under the scaffolding of a original Angle brace, electrical director Yang is a when installing a cable trough, found the supporting point of the Angle influence the installation position of cable tray, will arrange personnel to the mutilation, cable tray installed after the mutilation of brace was not recover in time, lead to summer XXX on the scaffolding, Angle iron by not brace, stress after bending deformation, summer so-and-so and falling, is the direct cause of the accident. 2, indirect cause summer so-and-so to 4 meters high hand frame, not wearing a seatbelt, the scaffolding force deformation after bending Angle, and the body center of gravity instability lead to falling to the ground directly, is the indirect cause of the accident. 3, the main reason for the construction group in the installation work not strictly implement company's installation and removal of hoisting machinery operation safety and environmental management rules 'and' high operation safety management regulation ', when installing a homework for security protection measures, equipment, and use of labor protection articles check is not enough, did not do to do not conform to the requirements of the safe use of scaffolding dismantled or recovery, is the main cause of the accident. Three, analysis of accident responsibility and 1, the company only do whatever on safety production management, has failed to spot for effective safety regulation, construction group configuration for construction personnel shortage of labor protection articles up workers don't wear your seat belt, so that falling falling to the ground directly result in serious injury. In accordance with the relevant safety production management regulations, give the firm a principal penalty of 2000 yuan, given punishment construction group head of RMB 2000. 2, project principal heads in the process of production, to the scene of the lack of safety management, safety measures do not reach the designated position, must be responsible for the accident. Penalties shall be imposed in accordance with the relevant company safety production management regulations, RMB 1500 yuan. 3, installation of production, production management, the safety of the installation site safety measures do not reach the designated position, the poor regulation, after decorate personnel to support Angle cut out, but I did not timely reset or remove the non-standard scaffolding, left a safety hazard, must be responsible for the accident. Penalties shall be imposed in accordance with the relevant company safety production management regulations, RMB 1000 yuan. 4, electrical assembly workshop director Yang is one, in the day did not check the scaffold before the assignment is in accordance with the specification, put people on the job, not in time for homework personnel equipped with labor protection articles, for not found in time and stop illegal phenomenon in the process of operation, must be responsible for the accident. Penalties shall be imposed in accordance with the relevant company safety production management regulations, RMB 500 yuan. 5, installation work as a production site, the manager of the principal, the hidden trouble in security at the work site without timely detection and correction, to work in the process of not found in time and stop illegal phenomenon, should be partly responsible for the accident. Penalties shall be imposed in accordance with the relevant company safety production management regulations, RMB 500 yuan. Four, the accident corrective measures 1, relevant departments in our company about this accident, organize all the installation personnel to draw lessons and accidents in accordance with the principle of 'four pass', the lines, continuously improve the safety consciousness of construction personnel. 2, earnestly implement the 'safety first, prevention first, comprehensive management' policy, strengthen the process discipline, strict production process, in accordance with the company of the installation and removal of hoisting machinery operation safety and environmental management rules 'and' high operation safety management regulations 'requirement for installation operation, to ensure safety in production. 3, original all non-standard scaffolding demolished, scaffolding to land, the shortage of labor protection articles immediately acquire in place, to ensure the safety of the workers. 4, according to the principle of 'tube production must tube safety', at the same time in the arrangement of production must decorate safety work at the same time, the implementation of safety measures, strengthen the production site safety inspection tour, found hidden dangers timely rectification.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...