Shizhan aluminum alloy tube truss needs to be used in conjunction with the base, square sleeve, crossarm, square head, hoist and other accessories when building the stage lighting frame. First upright the column, then assemble and connect the beam underneath, and finally hang the beam by hand hoist, and hang various light and sound equipment on it. The steps of the aluminum alloy light stand to build the stage booth: 1. First place the four bases on the ground roughly, adjust the lower legs so that they are on a horizontal plane; 2. Insert the oblique on the outside of the bases at the four corners Support the bottom part, insert 2 on each corner, a total of 8; 3. Fix the counter head on the base with screws, pay attention to the direction of rotation of the counter head is the same as that marked in the figure; 4. Put on the counter head Good square sleeve; 5. Connect the beam on the ground; 6. Connect the two ends of the beam to the two square sleeves on both sides. At this time, the beam is assembled on the ground; 7. The column tube The truss is laid flat and connected, and then one end is screwed on the opposite head, and the other end is screwed on the cross arm, and the hanging hoist and the cross arm are connected at the same time. The role of the hoist is to lift the lower beam tube truss Multiple people slowly erect the column tube truss together, taking care not to push the column with too much force, and then fix the screws above the head; 9. After the column is erected, hook the hook under the hoist to the bottom through the sling Of the beam; 10, 4 people a Slowly pull the hanging hoist to pull the beam to the left and right position of the person's head; 11. Install the light and sound equipment on the beam; 12, 4 people together pull the hanging hoist to the predetermined height to stop; 13, tilt One end of the support is tightened with the upright, and the other end is tightened with the horizontal support of the base, so that the gantry is completed. Shizhan has been focusing on exhibition and display equipment manufacturing for 8 years, integrating R & D, production, sales and service. More than 30 technical experts and professional technicians are connected throughout the process; independent research and development of advanced equipment, reasonable design and more scientific; able to provide customers with non-standard customized services.
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: firstname.lastname@example.org Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China