Outside the safety technical measures - the scaffold erection
Industry dynamic -
- aluminum alloy scaffolding manufacturer
Focus - aerial work platform
1, scaffolding, personnel must be through the special operations training examination shelf professional qualified scaffolder, mount guard personnel should be regular physical examination, eligible may show certificates.
Erection of scaffolding workers must wear safety helmet, wear your seat belt, wearing non-slip shoes.
2, operation layer on the construction load should comply with the design requirements, shall not be overloaded.
Shall not be template bracket, cable wind rope, pumping concrete conveying pipe fixed on the scaffold;
It is forbidden to hang lifting equipment.
3, when there are more than 6 wind and fog, rain weather, should stop scaffolding and demolition work.
After the rain on homework slippery measure should have.
4, scaffolding during using it is forbidden to dismantle the master node of longitudinal and transverse horizontal pole, vertical and horizontal to sweep the floor bar;
Even the wall pieces, bar hanging wire rope etc. Main stress.
5, may not be on the basis of the scaffold and adjacent mining operations, or security measures should be taken, and submitted to the competent leadership for approval.
6, the frontage of the scaffold, the lateral due protection measures to prevent falling objects hurtful.
7, welding work on the scaffold, there must be a fire protection measures and personnel guards.
8, site erection of temporary electricity lines and scaffolding grounding, lightning protection measures should press (
The relevant regulations of the standards.
9, take down the scaffolding, the ground should be set fencing and warning signs, and hold people to keep and prohibit the operation personnel into the line.
10, scaffolding set-up quality of components quality and body, should press (
Construction fastener type steel pipe scaffold safety technical specifications of the provisions of inspection acceptance, qualified rear must be put into use.
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: email@example.com Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China