One, the engineering general situation of a building project is 8 layer frame structure, total height 28 m, building area of 3800 m2.
Outside scaffolding using ground fastener type steel tube scaffold.
Second, after the accident in the afternoon, concrete worker zhang & times;
Hu was scaffolder monitor & times;
Arrange the erection of scaffolding on the third floor, zhang & times;
In the case of not wearing a seatbelt, stood since put on the steel template of operation, the template of length 1.
50 m, width of 0.
25 m, put on the scaffolding two small bar, there is no fixed.
When zhang & times;
Erect a 6 m long, about 24 kg heavy steel stud with fasteners, due to the upper pole outward tilt, zhang & times;
Although use consistent with several times, trying to make it accurate, but not to be, in overturning moment is too large, leading to the losing focus on scaffolding with steel tube from 8.
4 m high fall together, helmet falls outside of 2 m.
After the hospital, too much loss of blood, rescue invalid died that day.
Direct cause: the dead & times;
Because without the scaffolding, technical training, no card mount guard operation, safety consciousness, to the engineer of some of the rules and regulations to comply with the lax, is wearing a helmet, but high construction was not wearing a seatbelt, not according to the operation procedures of construction, the set-up of key parts in the process of operation main point is not clear, is the direct cause of the accident.
Indirect reasons: (1) monitor of scaffolder hu & times;
Safety awareness is poor, serious illegal command.
Hu & times;
Knowing that zhang & times;
Is engaged in the concrete work, has not received scaffolder professional skills training, without a scaffolder operation certificate, not wearing a seatbelt and without safety protection, ignore the safety operating rules, arrange the unlicensed personnel with high scaffolding.
2 projects with hu & times;
Scaffolding contractor agreement, only emphasize must hold relevant certificates, and did not seriously check special crafts operation certificate.
(3), head of the site found zhang & times;
Violation of operating procedures of construction, although oral points out, but failed to stop, in a timely manner to eliminate hidden dangers, plugging loopholes, eliminate illegal construction.
Illegal command and adventure brute-force blindly, ignoring the management of special operations personnel is the indirect cause of the accident.
The deceased zhang & times;
Without the scaffolding, technical training, no operation card mount guard, in violation of the 'special operations personnel safety technical appraisal management rules GB5306 & ndash;
In the 85 & other;
1 engaged in special operations personnel safety technical training must be conducted.
1 special operations personnel after safety technology training, must be appraised and tested for their qualifications obtained the operation license, to allow independent operation.
Rules and the construction safety inspection standards JGJ59 & ndash;
8 99 safety management assessment rules, namely, special operations personnel training must attend the relevant departments, and tested for their qualifications, show certificates.
The deceased zhang & times;
Not wearing a seatbelt and high work not safety protective measures, and standing on unsecured steel template, in violation of the technical specification for construction high operating safety JGJ80 & ndash;
In 91 about high homework personnel must have a reliable foothold and fasten your seat belt.
Construction unit of construction personnel safety training, special type of work did not carefully check operation certificate, in violation of the 'building law' article 36, stipulated in article 46: the enterprise must establish and improve the responsibility system for production safety and production safety education and training, strengthen safety education and training to the worker, make the enterprise system and improve the implementation of the safety of the workers with a good education.
Must put an end to violation command.
To seriously implement the safety production laws and regulations system, strictly implement the relevant provisions of the special operations personnel management and the laws, the barriers to use legal means to regulate the behavior of enterprise safety in production.
Construction site safety according to regulations, procedures and standards to develop a practical and feasible measures, all kinds of safety protection to reach the designated position, to ensure the safety of operating personnel, the work high above the personnel must wear a seat belt.
Safety protection facilities do not conform to the regulations, and shall not construction.
Aerial work personnel should be familiar with the construction and installation workers safe technology operating rules and high operation safety specification for construction of the building of the related regulations, and carefully executed.
Strengthening the work management of the project contract agreement.
Strengthen employee safety education and special operations personnel training work, make the worker has the ability to identify and eliminate dangerous operations, improve employee safety consciousness, to strengthen the professional training of special operations personnel appraisal system, the inspection qualified rear can mount guard, and conclude a contract for the safety in production, guarantee safety in production.
Enterprise must have a practical safety production management system and network security management system.
Clear management personnel at all levels of production safety responsibility, to improve the quality of the enterprise and management personnel, strengthen the security work, eliminate blind command, illegal operation.
Monitor of scaffolder hu & times;
Is directly responsible of the accident and the main responsible, responsible for the violation of labor law and without authorization, unlicensed personnel shall be responsible for special operations command, not according to stipulations issued to high homework personnel safety belt.
Project manager and the builder of the lack of strict safe production management oversight responsibility.
The deceased zhang & times;
Safety consciousness, abide by the regulations of lax on the spot, high operation was not wearing a seatbelt, not according to the operation procedures of construction, must be responsible for the accident.
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: email@example.com Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China