Scaffolding - laying safe operating procedures
Industry dynamic -
- aluminum alloy scaffolding manufacturer
Focus - aerial work platform
Jiangsu shizhan Ann
1 the laid of scaffolding must to do: shop, shop, can not have gaps, short board, probe plate.
2 the laying of scaffold board width should not be less than 1.
Scaffold board away from the wall shall not be greater than 20 cm;
Scaffolding when lap shall not be less than 20 cm;
Should be set up double putlog butt joint, spacing shall not be greater than 20 cm.
3 in frame hand corner planks should be cross lap, cushion flat and nail up scaffolding application block, not with a brick pads, scaffolding lap direction to the scaffolding of the heavy traffic in the same direction.
4 double scaffold board should be two people from outside to inside in order to, in the shop, the first block or turn to the most, a piece of scaffolding must hang on your seat belt, and again after the check and correct the homework.
5 the laid of feeding chute width shall not be less than 1.
5 m, slope shall not be greater than 1:3, prevent slippery spacing shall not be greater than 30 cm
We have 19 branches in China. Our products are also exported to clients in USA, Europe, Japan, Middle East, Australia and regions as South Asia. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your inquiry.
Contact Person: Millissa Du Email: firstname.lastname@example.org Tel: +86-0757-85100232 Mob: +86 13306182551 Address: Foshan City, Guangdong, China