Sub-station

 16 years manufacturer for metal truss, mobile stage, aluminium scaffolding, barriers, etc,.

Steel pipe scaffold properties - Industry dynamic - - aluminum alloy scaffolding manufacturer Focus - aerial work platform Jiangsu shizhan safety technology

by:Shizhan     2020-09-06
( 1) Outer diameter of steel pipe scaffold 48 ~ 51 mm thickness not serious corrosion and bending, flat or cracking of the steel pipe scaffold must be connected to the qualified steel fasteners, do not connect with wire and other materials; ( 2) The distance between the steel pipe shall not be greater than the distance of the transverse reinforcement, steel pipe shall not be greater than the distance between the distance of the transverse reinforcement. ( 3) Scaffolding must be based on the floor and tensile strong structure, vertical distance shall not be more than 4 m, drawing material strength shall not be less than 8 # twisted-pair fuses intensity, elevated cannot use flexible material in the join Rachel, to establish a reliable support: ( 4) Scaffold surface must be covered in the wall and the operation shall not be greater than 200 mm, can not have clearance and detecting board, layer should be set at the bottom of the flying scaffolding two rail or guardrail body, or set the fence or barrier. Should be strictly forbidden to use bamboo railings as a protective layer of scaffolding to 1 m. ( 5) The scaffolding must ensure that the whole structure deformation, over 20 m high of the scaffolding must set bracing, the width shall not be more than 7 bar, horizontal plane Angle should be 45 degrees and 60 degrees, height must be less than 20 m. ( 6) Height in more than 20 m special high scaffolding and scaffolding must have a design solution. ( 7) Used for the structures of the inner and outer bearing the scaffolding shall not be more than for 2646 N/decoration both inside and outside of the scaffold, and external scaffolding shall not exceed 1960 N/load. ( 9) Building construction outer edge ( Including scaffolding tools) With the overhead line of horizontal and vertical distance between lateral line should not be less than 3 m;
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...